Design pressure≤4.2MPa
Test pressure ≤5.5MPa
Design temperature: Depends on the design temperature of the sealant gasket
Plate materials: 304, 304L, 310S, 316L, 317L, 321, S31254, Ti, Ti-Pd, Ni200/201, C-276, C-2000, G-30, BC1, etc.
Plate thickness: 0.4, 0.5, 0.6, 0.7, 0.8, 1.0mm.
Sealing gasket materials: EPDM rubber, nitrile rubber NBR, fluororubber F, PTFE coated rubber, etc.
Single machine assembly area: 0.1~4000 square meters.
|
Gasket type |
Standard design temperature℃ |
Long-term use temperature ℃ |
Allowed selection of temperature ℃ |
|
(NBR) |
-20~110 |
25~100 |
25~100 |
|
(EPDM) |
-50~150 |
-50~135 |
-50~140 |
|
(HEPDM) |
-40~170 |
-35~150 |
-35~160 |
|
(F) |
-40~180 |
0~180 |
0~180 |